测量光纤外腔Fabry-perot干涉仪的白光干涉术

提出了一种基于白光干涉术测量低锐度光纤外腔Fabry Perot干涉仪（EFPI）的方法用宽带光源注入F P腔，在接收端用一高锐度的可调谐光纤F P滤波器对EFPI的反射光谱进行扫描，获得了周期性变化的光谱输出为了测量出EFPI的腔长，对光谱信号进行傅里叶变换，得到光谱的周期，由此求出EFPI的绝对腔长证明了用低锐度EFPI的测量准确度由腔长决定F P腔越长，测量准确度越高在腔长分别是200 μm,400 μm和600 μm时，测量的腔长与实际腔长相同.     

三甲基硅、三甲基锗和三甲基锡取代的一系列芘衍生物的紫外吸收和荧光性质

被三甲基硅(Me3Si-)、三甲基锗(Me3Ge-)和三甲基锡(Me3Sn-)取代的芘衍生的紫外吸收波长和未取代的芘相比较,波长红移.一,二,三,四取代三甲基硅芘最大吸收波长红移小于10nm.荧光强度和周期按Me3SiAr＞Me3GeAr＞Me3SnAr顺序减弱.1,3,6,8-四-三甲基硅芘的荧光强度在一系列芘衍生物中是最大的.     

Spectral and temporal characteristics of metallic nanoparticles produced by femtosecond laser pulses

We study the time of flight optical emission from titanium and tungsten nanosized particles, generated through femtosecond laser-matter interaction in vacuum, in the wavelength spectral range from 300 to 900 nm. Typical spectra consist of broadband structureless signals similar to black body emission from a macroscopic object. Nanoparticles temperature, deduced from their emission spectra, decreases drastically as a function of their time of arrival at a given distance from the target. This behaviour is seen to be independent of individual particle velocities.     

Dependence of film thickness on the electrical and optical properties of ZnO-Cu-ZnO multilayers

ZnO-Cu-ZnO multilayers were prepared by simultaneous RF magnetron sputtering of ZnO and DC magnetron sputtering of Cu. Cu films with different thickness were used as the intermediate metal layer. The optical and electrical properties of the multilayers studied by UV-vis spectrophotometer and four point probe method, respectively, shows that transmittance increases with decrease of copper thickness up to an optimum thickness of 5 nm and sheet resistance decreases with increase of thickness. Low resistivity and high transmission were obtained when the film structure has a thickness of ZnO/Cu/ZnO: 50/5/50 nm. The performance of the multilayers as transparent conducting material was better than the single layer ZnO of equal thickness.     

Study of the structural and optical properties of GaN/AlN quantum dot superlattices

We study GaN/AlN Quantum Dot (QD) superlattices utilizing the STREL environment which allows the building of atomistic models, relaxation of the structures, the calculation of the electronic states and optical transitions and the visualization of the results. The forces are calculated using an appropriate Keating or Stillinger–Weber interatomic potential model and the electronic states and optical transitions using a tight-binding formulation which is economical and produces realistic electronic properties. The relaxed structure has strains mainly in the GaN region which are compressive and small tensile strains in the AlN region, mainly below the QD. In the calculation of the electronic states and of the optical transitions the strains are included realistically at the atomistic level. The study of the wavefunctions close to the fundamental gap show how these strains influence the form and spatial extent of the wavefunction. Very close to the fundamental gap the valence and some conduction states are confined in the QD and have considerable oscillator strength.     

Measuring small wavelength differences by heterodyne interferometry and optical activity of chiral crystal

The optical activity of a chiral crystal and common-path heterodyne interferometry are used in a simple measurement technique that was developed to measure small wavelength differences. When circularly polarized heterodyne light passes through a chiral crystal, the plane of polarization rotates. The phase difference between the right- and left-circular lights is directly proportional to the angle of rotation. The rotation angle depends strongly on the wavelength. The phase difference can be accurately detected and substituted into specially derived equations to estimate wavelength variations. The feasibility of this method was demonstrated and the wavelength sensitivity was about 0.00812 nm. This method provides the advantages of a simple structure, ease of operations, a large wavelength measurement range and high sensitivity.     

Novel model of FM-noise conversion in a UMZI using RF external phase modulation of lasers: Theoretical and experimental results

In this paper, we propose and demonstrate a new and original model for theoretical calculation and experimental measurement of the noise power spectral density (NPSD) in phase-modulated optical links. The phase modulation is operated in the RF frequency range by an external phase modulator. The NPSD is derived for the first time in interferometric systems, by considering all effects such as the 1/f FM noise of the laser and white noise applied to light from a 1550 nm DFB laser, with phase modulation. The results show for the first time the influence of the phase modulation index, modulation frequency and interferometric delay in the phase-to-intensity noise conversion. The experimental and simulation results of conversion of FM-noise to intensity noise in an optical link by considering the external RF phase modulation are shown with good agreement.     

Parametric oscillation at 2.1 μm in periodically poled RbTiOAsO4

An Nd:YAG laser-pumped periodically poled RbTiOAsO₄ (PPRTA) optical parametric oscillator (OPO) near degeneracy is reported. At a pump power of 3.7 W, a net conversion efficiency of 43% was obtained. These crystals were found to be phase-matchable for the higher order quasi-phase-matched second-harmonic generation (SHG) in the visible range. Detailed analyses of the phase-matching properties for these processes were made by using the published Sellmeier and thermo-optic dispersion formulas.     

Optical absorption and thermoluminescence studies on LiF-Sb2O3-B2O3 glasses doped with Ni ions

20LiF-(30−x)Sb₂O₃-50B₂O₃:xNiO glasses with the value of x (ranging from 0 to 1.0 mol% in steps of 0.2) were prepared. A number of studies, viz. differential scanning calorimetry, optical absorption, magnetic susceptibility and thermoluminescence, on these glasses were carried out as a function of nickel ion concentration. An anomaly has been observed in all the properties of these glasses when NiO concentration is about 0.6 mol%. The results of these studies were analysed in the light of different environments of nickel ions in the glass network.     

A study of structural, compositional and optical properties of spray-deposited non-stoichiometric (Zn,Fe)S thin films

Non-stoichiometric ternary chalcogenides (Zn,Fe)S were prepared in the film form by pyrolytic spray deposition technique, using air/nitrogen as the carrier gas. The precursor solution comprised of ZnCl₂, FeCl₂ and thiourea. The depositions were carried out under optimum conditions of experimental parameters viz. carrier gas (air/nitrogen) flow rate, concentration of precursor constituents, nozzle substrate distance and temperature of quartz substrate. The deposited thin films were later sintered in argon at 1073 K for 120 min.The structural, compositional and optical properties of the sintered thin films were studied. X-ray diffraction studies of the thin films indicated the presence of (Zn,Fe)S solid solution with prominent cubic sphalerite phase while surface morphology as determined by scanning electron microscopy (SEM) revealed a granular structure.The chemical composition of the resulting thin films as analyzed by energy dispersive X-ray analysis (EDAX) reflected the composition of the precursor solutions from which the depositions were carried out with Fe at% values ranging from 0.4 up to 33.SEM micrographs of thin films reveal that the grain sizes of the thin films prepared using air as carrier gas and N₂ as carrier gas are in the vicinity of 300 and 150 nm, respectively.The diffuse transmittance measurements for thin films, as a function of wavelength reveal the dependence of direct optical band gap on Fe content and type of phase.